Small amount fixed-quantity musashi dispenser NANO MASTER SMP-II-Mechanical Musashi Dispenser_Musashi Dispenser controller

Small amount fixed-quantity musashi dispenser NANO MASTER SMP-II

It is line-up by low cost type of syringe method plunger musashi dispenser.

It is line-up by low cost type of syringe method plunger dispenser.

Small amount fixed-quantity dispenser <br> NANO MASTER SMP-II・Small amount of 1/10,000 ml at the minimum discharges low viscosity liquid material.

・We realize digital control and Super fine dispensing by measurement method.

・Dripping is dissolved by original plunger mechanism and case back function.

・Consecutive dispense of small amount is possible.

・Number inputs dispensing volume into direct and realizes superior operability, high reproducibility.

・We are equipped with residual quantity detective function.

・General-purpose model dispense head Equipped which is available for 5-50 ml of syringe.

・Syringe uses our reference standard and realizes low running cost.

・Micro syringe Equipped is possible. (special order correspondence)

Name	Super small amount fixed-quantity dispenser NANO MASTER
Name	SMP-II
Model	SMP-2
Controller Model	SMP2-C
Dispensing method	Volume measurement method
Discharge pressure setting	Microcomputer digital Discharge pressure setting
Application liquid material	Anaerobic adhesive, silicone resin, medicinal solution, UV adhesive, volatile liquid materials, flux, ink
Application syringe	5, 10, 20, 30, 50 mL of syringe
Dispense mode	Timed mode/manual mode, fine mode/normal mode
Dispensing volume set range	At the time of 5 mL of syringe choices…0.1-5000.0μL At the time of 10 mL of syringe choices…0.1-10000.0μL At the time of 20 mL of syringe choices…0.1-20000.0μL At the time of 30 mL of syringe choices…0.1-30000.0μL At the time of 50 mL of syringe choices…0.1-48818.3μL
Main function	Automatic residual quantity warning, case back, synchronized speed, dispense counter, stopwatch, Unit indication reshuffling, Japanese-English indication reshuffling
The number of the channels	400CH
RS-232C serial communication	Possibility
Input signal	We pre-set dispense, channel reshuffling, dispense mode reshuffling, channel, and channel steps, Synchronized speed ON
Output signal	Is discharging dispense completion/, and (reshuffling type) is busy, among error, residual quantity warning, maintenance under limit, During electricity, it is change demand, direction of movement
Normal voltage and frequency	AC100-240V 50/60 Hz
Power Consumption	55W
Conformity standard	CE marking (low voltage order, EMC order), EU RoHS
Head Exterior dimensions WDH	W50 X D87 X H352.5mm
Head Weight	1.8 kg
Controller Exterior dimensions WDH	W300 X D250 X H111mm
Controller Weight	4.5 kg